MIT Engineers
Moderators: eCat, hedge, Cletus
- aTm
- Muad'Dib
- Posts: 8809
- Joined: Fri Feb 25, 2011 12:25 am
- College Hoops Affiliation: Texas A&M
- Mascot Fight: Big Cat/Tiger/Lion/Etc
- Location: Inner Loop, Houston, TX
Re: MIT Engineers
My TV hasn't had even a hint of a problems 3 days later.
Sure, I could have stayed in the past. I could have even been king. But in my own way, I am king.
- bluetick
- All-American
- Posts: 6092
- Joined: Wed Apr 06, 2011 11:04 am
- College Hoops Affiliation: Tennessee
Re: MIT Engineers
aTm wrote:Unless you spend a fuckton on an OLED where each pixel has its own lighting, you will have darkspots in the corners.bluetick wrote:Over the weekend mine turned dark in the corners and contrast and brightness had no effect. Customer support said this was common and suggested I increase the wattage in the viewing room ("you need bright rights..that make it better")aTm wrote:I ended up buying the TCL over the Vizio. $200 cheaper, plus testing them out the Roku based TV definitely seemed both more intuitive and made the SmartCast system on the VIZIO feel sluggish.
Your TV is edge lit, unlike the one I bought which has full array backlighting. In yours, the light that shines on the back of the LCD pixels comes from lights lining the edges of the panel. These TV's almost always have slight dark spots in the corners. If its gotten worse suddenly, it may be a physical issue with the backlighting, or Im guessing somebody may have messed with the brightness/backlight settings in the picture settings on the tv to a setting a where the issue suddenly stands out. You said you messed with the brightness/contrast. What about the setting named "backlight?"
Damn aTm - I thought the customer service "comments" gave it away. "you need bright rights". Picture still perfect, eyes still bleeding..
"OMG, this is terrible. This is the end of my presidency. I AM FUCKED!"
- aTm
- Muad'Dib
- Posts: 8809
- Joined: Fri Feb 25, 2011 12:25 am
- College Hoops Affiliation: Texas A&M
- Mascot Fight: Big Cat/Tiger/Lion/Etc
- Location: Inner Loop, Houston, TX
Re: MIT Engineers
I wish they would feed you to Mr. Wu's pigs.
Sure, I could have stayed in the past. I could have even been king. But in my own way, I am king.
- bluetick
- All-American
- Posts: 6092
- Joined: Wed Apr 06, 2011 11:04 am
- College Hoops Affiliation: Tennessee
Re: MIT Engineers
I figure TLC tech support sounds like this.
[youtube]sE154vtGZms[/youtube]
[youtube]sE154vtGZms[/youtube]
"OMG, this is terrible. This is the end of my presidency. I AM FUCKED!"
- aTm
- Muad'Dib
- Posts: 8809
- Joined: Fri Feb 25, 2011 12:25 am
- College Hoops Affiliation: Texas A&M
- Mascot Fight: Big Cat/Tiger/Lion/Etc
- Location: Inner Loop, Houston, TX
Re: MIT Engineers
[youtube]8rGU2xwSsFs[/youtube]
Sure, I could have stayed in the past. I could have even been king. But in my own way, I am king.
- Jungle Rat
- The Pied Piper of Crazy
- Posts: 30206
- Joined: Fri Feb 25, 2011 10:38 am
- College Hoops Affiliation: Florida
- Mascot Fight: Croc/Gator/Etc
- Location: Crows Parents Basement
Re: MIT Engineers
F- on so many levelsaTm wrote:I wish they would feed you to Mr. Wu's pigs.
- eCat
- Mr. Pissant
- Posts: 23297
- Joined: Fri Feb 25, 2011 3:22 am
- College Hoops Affiliation: Kentucky
- Mascot Fight: Bear/Grizzly/Etc
- Location: The mediocre but almost livable city of Cincinnati
Re: MIT Engineers
I bought my brother the Echo 58V chainsaw and he loves it. He'll never own a gas powered chainsaw again
I like the stinky pinky but only up to the first knuckle, I do not want a GD thumb up there--I've told her multiple times and I always catch her when she tries to pull a fast one---it's my butthole for Chrissakes I'm gonna know--so cut out the BS.
- hedge
- Legend
- Posts: 26706
- Joined: Mon Feb 28, 2011 11:09 am
- College Hoops Affiliation: North Carolina
- Mascot Fight: Bear/Grizzly/Etc
Re: MIT Engineers
I don't really have much need for a chainsaw, but I'm probably going to get one to go with this battery. A limb fell down in our yard and I borrowed Logan's chainsaw, took about 15 minutes to get it cranked. Once it was cranked, it worked great, but goddamn, I'd love to just go out there with a battery powered one and just pull the trigger and have it work immediately. For no more than I'd need it for, a battery powered one would be great...
I want someone's ass blistered in the middle of Thanksgiving Square.
- hedge
- Legend
- Posts: 26706
- Joined: Mon Feb 28, 2011 11:09 am
- College Hoops Affiliation: North Carolina
- Mascot Fight: Bear/Grizzly/Etc
Re: MIT Engineers
The brand is Greenworks, I never heard of them but the guy at Lowe's said it was a made by some other company (Kohl's?). Researching it now, it looks like it's actually some Chinese company, but I did see where Stihl bought a minority stake in the company. Irregardless, this thing works great...10ac wrote:hedge, what model?
I want someone's ass blistered in the middle of Thanksgiving Square.
- eCat
- Mr. Pissant
- Posts: 23297
- Joined: Fri Feb 25, 2011 3:22 am
- College Hoops Affiliation: Kentucky
- Mascot Fight: Bear/Grizzly/Etc
- Location: The mediocre but almost livable city of Cincinnati
Re: MIT Engineers
yea that's the thing, no worries about bad gas or having to pull on it for an hour to get it started. Its instant.
and if all you do is just the limb that falls down after a wind storm, its perfect
I have a stihl gas powered saw and its been great but if I had to do it over again, I'd get that echo.
I also have my grandfathers Husqvarna that he bought when I was in 5th grade. It doesn't run but I've been planning on rebuilding it just for sentimental reasons.
and if all you do is just the limb that falls down after a wind storm, its perfect
I have a stihl gas powered saw and its been great but if I had to do it over again, I'd get that echo.
I also have my grandfathers Husqvarna that he bought when I was in 5th grade. It doesn't run but I've been planning on rebuilding it just for sentimental reasons.
I like the stinky pinky but only up to the first knuckle, I do not want a GD thumb up there--I've told her multiple times and I always catch her when she tries to pull a fast one---it's my butthole for Chrissakes I'm gonna know--so cut out the BS.
- hedge
- Legend
- Posts: 26706
- Joined: Mon Feb 28, 2011 11:09 am
- College Hoops Affiliation: North Carolina
- Mascot Fight: Bear/Grizzly/Etc
Re: MIT Engineers
I have to think that as battery technology gets better, you'll have smaller and smaller batteries that last longer and longer. Eventually it'll probably be something the size of like a 6 volt battery that'll run longer than you care to stay out there and work...
I want someone's ass blistered in the middle of Thanksgiving Square.
- hedge
- Legend
- Posts: 26706
- Joined: Mon Feb 28, 2011 11:09 am
- College Hoops Affiliation: North Carolina
- Mascot Fight: Bear/Grizzly/Etc
Re: MIT Engineers
"I also have my grandfathers Husqvarna that he bought when I was in 5th grade. It doesn't run but I've been planning on rebuilding it just for sentimental reasons."
Somewhere ol' Pappy is shedding a tear...
Somewhere ol' Pappy is shedding a tear...
I want someone's ass blistered in the middle of Thanksgiving Square.
- eCat
- Mr. Pissant
- Posts: 23297
- Joined: Fri Feb 25, 2011 3:22 am
- College Hoops Affiliation: Kentucky
- Mascot Fight: Bear/Grizzly/Etc
- Location: The mediocre but almost livable city of Cincinnati
Re: MIT Engineers
all three of his great grandsons are named after him.
He left quite an impression on us.
He left quite an impression on us.
I like the stinky pinky but only up to the first knuckle, I do not want a GD thumb up there--I've told her multiple times and I always catch her when she tries to pull a fast one---it's my butthole for Chrissakes I'm gonna know--so cut out the BS.
- hedge
- Legend
- Posts: 26706
- Joined: Mon Feb 28, 2011 11:09 am
- College Hoops Affiliation: North Carolina
- Mascot Fight: Bear/Grizzly/Etc
Re: MIT Engineers
For aTm...
[youtube]0b5R5KUsuYo[/youtube]
[youtube]0b5R5KUsuYo[/youtube]
I want someone's ass blistered in the middle of Thanksgiving Square.
- eCat
- Mr. Pissant
- Posts: 23297
- Joined: Fri Feb 25, 2011 3:22 am
- College Hoops Affiliation: Kentucky
- Mascot Fight: Bear/Grizzly/Etc
- Location: The mediocre but almost livable city of Cincinnati
Re: MIT Engineers
so I bought that Husqvarna 150BT at lunch today.
Had a sizeable credit at Lowes so it made the decision easier.
The comparable Stihl was $200 more without the credit
Had a sizeable credit at Lowes so it made the decision easier.
The comparable Stihl was $200 more without the credit
I like the stinky pinky but only up to the first knuckle, I do not want a GD thumb up there--I've told her multiple times and I always catch her when she tries to pull a fast one---it's my butthole for Chrissakes I'm gonna know--so cut out the BS.
- bluetick
- All-American
- Posts: 6092
- Joined: Wed Apr 06, 2011 11:04 am
- College Hoops Affiliation: Tennessee
Re: MIT Engineers
Speaking of Deadwood:
http://www.msn.com/en-us/tv/news/deadwo ... ar-BBPn79F
Best cocksucking news I've heard in forever.
http://www.msn.com/en-us/tv/news/deadwo ... ar-BBPn79F
Best cocksucking news I've heard in forever.
"OMG, this is terrible. This is the end of my presidency. I AM FUCKED!"
- eCat
- Mr. Pissant
- Posts: 23297
- Joined: Fri Feb 25, 2011 3:22 am
- College Hoops Affiliation: Kentucky
- Mascot Fight: Bear/Grizzly/Etc
- Location: The mediocre but almost livable city of Cincinnati
Re: MIT Engineers
I read that too
its been so long, I just wonder how many people are really excited about it.
I guess once they start showing trailers and if it looks good interest will build.
I loved the show when it was on but I don't even remember what was going on when it ended.
its been so long, I just wonder how many people are really excited about it.
I guess once they start showing trailers and if it looks good interest will build.
I loved the show when it was on but I don't even remember what was going on when it ended.
I like the stinky pinky but only up to the first knuckle, I do not want a GD thumb up there--I've told her multiple times and I always catch her when she tries to pull a fast one---it's my butthole for Chrissakes I'm gonna know--so cut out the BS.
- crashcourse
- Senior
- Posts: 3545
- Joined: Tue Apr 05, 2011 7:18 pm
- College Hoops Affiliation: Kansas State
- Mascot Fight: Croc/Gator/Etc
Re: MIT Engineers
I forgot too --was the nemesis major dad or was it someone else--well bye guy is dead now also but I cant remember if he got killed in the show
I know the third season the sheriif had a new family and calamity jane was still running around
I know the third season the sheriif had a new family and calamity jane was still running around
- Saint
- All-American
- Posts: 5051
- Joined: Fri Mar 25, 2011 12:53 am
- College Hoops Affiliation: North Carolina
- Mascot Fight: Big Cat/Tiger/Lion/Etc
Re: MIT Engineers
Can we get gifs ?